AMIG-350LST-R /350RPL

AMIG350RPL series is a welding equipment with high efficiency, high  quality and low spatter. It precisely controls metal transfer through  high-speed DSP signal processing, in order to realize spatter-free welding,  reduce labor cleaning cost and improve deposition rate. It comes with  three technologies. Furthermore, it is the best choice for the applied  industries of galvanized carbon steel sheet and medium plate.


Output t35.png t33.png 3.png t44.png       Input t39.png  t41.png       Process t26.jpg  微信图片_20220317095739.png


Materials t45.png t46.png t50.png                                                         t11.jpg  t15.jpg


Share:

Inquiry
Features
Specification
Application
Accessories
Download
  • Full digital control: MCU+DSP core, high-speed control of metal  transfer cooperates with chopping wave technology to achieve an  advanced welding process

  • Multi-process: LST/CV MIG, PULSE MIG(AMIG350RPL)

  • LST - low spatter technology: over 80% reduced spatter, reduced  labor cost

  • Sheet welding expert: 0.7mm thick carbon steel sheet, outstanding  galvanized sheet welding performance

  • One-key operation: save and recall 100 sets of parameters


AMIG350-LST-RAMIG350RPL
Rated input voltage/frequency (V/Hz)3 phase, AC380V±10%, 50/60Hz
Rated input capacity (KVA)14
Rated input current (A)21
Range of welding current (A)60~350
Range of welding voltage (V)17~31.5
Duty cycle (%)60
OCV (V)90
Full-load efficiency (%)≥87
Wire diameter (mm)Ф0.8, Ф1.0, Ф1.2
Protection classIP23
Insulation classH
Gas flow (L/min)15~20
Dimension (mm)660*320*560
Weight (kg /lb)55 /121.3

 

AMIG350LST-R.jpg

Standard Equipments
  • 1 Power source

  • 1 Connected primary cable L=3m

  • 1 Ground cable L=3m with clamp

  • 1 Wire feeder

  • 1 Wirefeeder cable L=5m

  • 1 Wire conduit

  • 1 Voltage feedback wire

  • 1 Analog control cable

  • 1 Wire spool holder

ONLINE MESSAGE

SUBMIT

RELATED PRODUCTS